EPM7064S

Altera · CPLD · MAX 7000S

4 ordering codes · 4 in stock

EPM7064S: Origin, Features, Discontinuation and Successors

The EPM7064STC44-10N is an Altera MAX 7000S CPLD. The EPM7064S is a 5 V CPLD from Altera's MAX 7000S family. This page tells its story: where it comes from, what it does, how it was discontinued, where it stands today and what can take its place.

EPM7064S ordering codes

Package, speed and temperature grade are decoded from the part number; confirm against the datasheet.

Ordering codePackageSpeedTemperatureStockLifecycle
EPM7064SLC44-10N———Available—
EPM7064STC100-5———Available—
EPM7064STC100-6———Available—
EPM7064STC44-6N———Available—

Origin

The EPM7064S belongs to the MAX 7000S family, the in-system-programmable version of Altera's MAX 7000 CPLDs. Altera's data sheet does not list end markets. It does note that "MAX 7000S devices in the -5, -6, -7, and -10 speed grades … comply with the PCI Special Interest Group (PCI SIG) PCI Local Bus Specification, Revision 2.2" (source: MAX 7000 data sheet v6.6 (third-party hosted copy), General Description).

Key features

From the MAX 7000 Programmable Logic Device Family Data Sheet (DS-MAX7000-6.6, June 2003):

  • 64 macrocells, 1,250 usable gates, 4 logic array blocks, up to 68 user I/O.
  • 5.0 V core: the VCCINT pins must always connect to 5.0 V. The I/O can run at 3.3 V or 5.0 V (MultiVolt).
  • 5.0 V in-system programming through JTAG.
  • Speed grades -5, -6, -7 and -10.
  • Four packages: PLCC44 and TQFP44 (36 user I/O), PLCC84 and TQFP100 (68 user I/O).
  • Ordering codes ending in F mark devices "tested to the constant algorithm", in the data sheet's words. N marks the lead-free version.

History: changes and discontinuation

  • 2002–2005: three Altera notices ended some F-suffix codes early: PDN0203 (issued 15 April 2002, last order 31 October 2003), PDN0510 (issued 30 June 2005, last order 30 June 2006) and PDN0518 (issued 28 December 2005, last order 31 December 2006). For PDN0203 and PDN0518, Altera listed the same code without F as the replacement.
  • 2009: PDN0903 (issued 8 June 2009) discontinued the EPM7032S codes and named the EPM7064S in the same package as their pin-compatible replacement (page 3).
  • 2016: PDN1619 (issued 1 December 2016) discontinued the whole MAX 7000S family. Last order 1 June 2017, last shipment 1 December 2017. No replacement devices are listed.

Where it stands today

Factory supply ended in December 2017, so any genuine EPM7064S is at least that old. Altera's notices list 50 EPM7064S ordering codes, and industrial grade appears only in the -7 speed grade.

When you buy stock:

  • Quote the full ordering code, including F or N. A BOM line such as an industrial -10 does not match any listed code.
  • Check the board voltage. The core needs 5.0 V; this part does not run on a 3.3 V-only board.
  • Check the date code, and ask for photos of the parts, labels and packaging. See how to identify refurbished and counterfeit chips and IC date codes and traceability.

Successors and replacement choices

PDN1619 lists no replacement devices for the family.

Possible alternatives

No replacement is on record yet for EPM7064S. Ask us for a replacement and tell us the package and supply voltage.

  • A larger device in the same family. EPM7128S comes in PLCC84 and TQFP100, but it was discontinued under the same PDN1619, so it is a stock-only route.
  • Altera's newer CPLDs. PDN0903 recommends MAX II for new designs only in its EPM7032S entry; Altera publishes no such statement for the EPM7064S. MAX II and MAX V have a different core voltage and different packages, so moving to them means a new board.
  • 5 V is the main question for any replacement. See migrating 5V-tolerant CPLD designs and MAX 7000S and MAX 3000A are discontinued. How we grade: how we rate replacements.

Sources

  • Altera MAX 7000 Programmable Logic Device Family Data Sheet, DS-MAX7000-6.6 (vendor document, hosted by a third party): https://mil.ufl.edu/4712/docs/m7000.pdf
  • Altera PDN1619: https://docs.altera.com/api/khub/documents/33v5Z_tMbHPXH64PazShWA/content
  • Altera PDN0203: https://docs.altera.com/api/khub/documents/0mylYqjRzw0rWBit_SgkKQ/content
  • Altera PDN0510: https://docs.altera.com/api/khub/documents/E1foD9QoYX17n3a4Pv7lgQ/content
  • Altera PDN0518: https://docs.altera.com/api/khub/documents/HQDhlULfMSSLZyeUH1xP1Q/content
  • Altera PDN0903: https://docs.altera.com/api/khub/documents/p1sCpCImXcNyx4TMmCQQRg/content

Get a quote

Send the full ordering code (for example EPM7064STC44-10N), quantity, date code requirement and target date. For a replacement, tell us the package and which pins see 5 V. Email [email protected] or WhatsApp us.

PCWIT is an independent distributor, not an authorized distributor or agent of Altera or Intel. Names are trademarks of their owners, used for identification only. Specifications are subject to the manufacturer's datasheet. Replacement suitability depends on your design. Verify before production.

FAQ

Which EPM7064S ordering codes can PCWIT supply?

4 ordering codes are listed above; 4 in stock now. Codes without stock can still be quoted: we source by the exact ordering code.

How do I ask PCWIT to price EPM7064S?

Send the full ordering code and quantity through the quote form, or message us on WhatsApp or by email. Where a price is shown on an ordering-code page, it is subject to stock confirmation; otherwise each quote reflects the lot we find and the quantity.